Hyundai Genesis (DH): Driveshaft and axle / Front Axle Assembly
- Front Hub / Knuckle / Tone Wheel Components and Components Location
- Front Hub / Knuckle / Tone Wheel Repair procedures
Troubleshooting Trouble SymptomProbable causeRemedyVehicle pulls to one sideScoring of driveshaft ball jointReplaceWear, rattle or scoring of wheel bearingReplaceDefective front suspension and steeringAdjustment or ReplaceVibrationWear, damage or bending of driveshaftReplaceDriveshaft rattle and hub serrationReplaceWear, rattle or scratching of wheel bearingReplaceShimmyDefective wheel balanceAdjustment or ReplaceDefective front suspension and steeringAdjustment or ReplaceExcessive noiseWear, damage or bending of driveshaftReplaceRattle of driveshaft and worn hub splinesReplaceWear, rattle or scoring of wheel bearingReplaceLoose hub nutAdjustment or ReplaceDefective front suspension and steeringAdjustment or Replace
Components 1. Front knuckle assembly2. Dust cover3. Front hub bearing4. Brake disc
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Sensor Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Heating, Ventilation and Air Conditioning
- Engine Electrical System
- Automatic Transmission System (SBC)
- New on site
- Most important about car
