Hyundai Genesis: AWD Control System / AWD ECU Components and Components Location

Hyundai Genesis (DH) 2013-2016 Service Manual / 4 Wheel Drive (AWD) System / AWD Control System / AWD ECU Components and Components Location

Components Location

ITA (Integrated Transfer case Actuator)

The ITA is a unit integrated with the AWD ECU and motor, and the AWD ECU variably controls the magnitude of the driving force delivered to the front wheel by determining the driving condition from the various input signals.

1. AWD ECU
2. Motor

AWD Control System

...

AWD ECU Description and Operation

Description The AWD ECU distributes the driving force to the front/rear wheel through controlling the multi plate clutch on the AWD transfer case by analyzing the input information, i.e. the wh ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4. 5. Check that the resistance is withi ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures

Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, and put a finger on the open end of the PCV valve to make sure that the intake manifold vacuum turns to vacuum state. ...