Hyundai Genesis (DH): Transfer Assembly / Transfer Fluid Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / 4 Wheel Drive (AWD) System / Transfer Assembly / Transfer Fluid Repair procedures

Inspection
   
Prohibition on checking, refilling and replacing the transfer case oil
-
Do not check, refill and replace the transfer case oil because the oil for the transfer case only (ultra-low viscosity of ATF SHELL TF 0870) is filled when coming out of the factory.
-
Do not check and replace the oil.
-
No drain plug
-
In case that the transfer case (AWD) oil-related failure code (DTC) appears, replace the transfer oil case assembly.

    Lubricant ItemDefined lubricantCapacityTransfer oilOil for the transfer case onlyUltra low viscosity of ATF SHELL TF08700.620L(0.165 U.S gal., 0.66 U.

    Removal     Use caution when handling the transfer case. Preventing the ITA (Integrated Transfer case Actuator ) from damage 1) In case of transporting the transfer case

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures

    Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0223