Hyundai Genesis (DH): Starting System / Starter Specifications
| Specification |
| Item | Specification | |
| Rated voltage | 12 V, 1.7 kW | |
| The number of pinion teeth | 12 | |
| Performance [No-load, 11.5 V] | Ampere | Max. 105 A |
| Speed | Min. 2,550 rpm | |
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.
Components 1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Planet gear7. Shield8. Armature assembly9. York assembly10.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Heating, Ventilation and Air Conditioning
- Smart Cruise Control Unit Repair procedures
- Body Electrical System
- New on site
- Most important about car
