Hyundai Genesis (DH): Front / Rear Parking Assist System / Specifications
| Specification |
| Item | Specification |
| Ultrasonic sensor | Voltage rating | DC 12 V |
| Detecting range | 40 cm ~ 120 cm |
| Operation voltage | DC 9 ~ 16 V |
| Operation current | MAX 300 mA |
| Operation temperature | -30 |
Component Location 1. BCM (Body Control Module)2. Ultrasonic sensor Rear parking assist control unit function is built in BCM (body control unit).
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Steering System
- Body Electrical System
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- New on site
- Most important about car
