| Components |

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat. (Refer to Body - "Front Seat Assembly") 3. Driver settings menu (USM) is Off, 4.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver's door trim. (Refer to Body - "Front Door Trim") 3. Remove the memory power seat switch connector (A).
S
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.