Hyundai Genesis (DH): Seat Electrical / Lumbar support switch Components and Components Location
| Component |
Inspection Power Seat Motor 1. Disconnect the connectors for each motor. 2. When the battery power is supplied to the motor connector, check the motor for smooth operation.
Removal 1. Disconnect the battery(-) terminals. 2. Remove the front seat shield outer cover. (Refer to Body - "Front Seat Shield Outer Cover" ) 3.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Restraint
- General Information
- Front Door
- New on site
- Most important about car
