Hyundai Genesis (DH): General Information / Specifications
Items
| Specification
|
Fuel Tank
| Capacity
| 77 lit. (20.3 U.S.gal., 81.4 U.S.qt., 67.7 lmp.qt.)
|
Fuel Filter
| Type
| Paper type
|
Fuel Pressure
| Low Pressure Fuel Line
| 343 ~ 598 kPa (3.5 ~6.1 kgf/cm?, 49.8 ~ 86.7 psi)
|
High Pressure Fuel Line
| 2.0 ~ 14.7 MPa (20.0 ~ 150.0 kgf/cm?, 284.5 ~ 2133.5 psi)
|
Fuel Pump
| Type
| Electrical, in-tank type
|
Driven by
| Electric motor
|
High Pressure Fuel Pump
| Type
| Mechanical type
|
Driven by
| Camshaft
|
Barometric Pressure Sensor (BPS)
? Type: Piezo-resistive pressure sensor
? Specification
Pressure [kPa (kgf/cm?, psi)]
| Output Voltage (V)
|
10.0 (0.01, 0.15)
| 0.50
|
55.0 (0.56, 7.98)
| 2.21
|
115.0 (1.17, 16.9)
| 4.50
|
Intake Air Temperature Sensor (IATS)
? Type: Thermistor type
? Specification
Temperature
| Resistance (k?)
|
|
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel pump and the fuel feed lineHeated Oxygen Sensor Socket Wrench(09392-1Y100)Removal and installation of the heated oxygen sensor? SST No.
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect the front fog lamp connector (A).
4.
Remove the front fog lamp assembly (A) after loosening the mounting nut.
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Verify that the intake actuator operates to the recirculation position when connected in reverse.
