Hyundai Genesis (DH): General Information / Special Service Tools

Hyundai Genesis (DH) 2013-2016 Service Manual / Engine Control / Fuel System / General Information / Special Service Tools

Special Service Tools
Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)

Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)

Connection between the high pressure fuel pump and the fuel feed line
Heated Oxygen Sensor Socket Wrench
(09392-1Y100)

Removal and installation of the heated oxygen sensor

? SST No.09392-2H100 model also can be used for removing the Heated Oxygen Sensor.
Torque Wrench Socket (17mm)
(09314-3V100)

Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool
(09353-2B000)

Installation of the injector combustion seal

    Specifications Fuel Delivery System ItemsSpecificationFuel TankCapacity77 lit. (20.3 U.S.gal., 81.4 U.S.qt., 67.7 lmp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line343 ~ 598 kPa (3.

    Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The resistance measured at high temperature after running the vehicle may be high or low.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Description and Operation

    Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor

    Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0218