Hyundai Genesis (DH): Rear Door / Rear Door Belt Outside Weatherstrip Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Outside Weatherstrip Repair procedures

Replacememt
1.
Pull down the rear door window glass to the lowest level by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the rear door belt outside weartherstrip (A) by pulling it upward.

3.
Install in the reverse order of removal.
   

    Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the rear door outside handle cover (A). Tightening torque : 6.

    Replacement 1. Loosen the rear door checker (B) mounting bolt. 2. Detach the clips, then remove the rear door side weatherstrip (A). Tightening torque : 16.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Description and Operation

    Description BSD is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm (visual and auditory).

    Hyundai Genesis (DH) 2013-2016 Service Manual: A/C Pressure Transducer Description and Operation

    Description The A/C Pressure Transducer (APT) converts the pressure value of high-pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it at high speed or low speed.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0269