Hyundai Genesis (DH): Rear Door / Rear Door Side Weatherstrip Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Side Weatherstrip Repair procedures

Replacement
1.
Loosen the rear door checker (B) mounting bolt.
2.
Detach the clips, then remove the rear door side weatherstrip (A).
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)

3.
Install in the reverse order of removal.
   

    Replacememt 1. Pull down the rear door window glass to the lowest level by pressing the power window glass switch. 2. After loosening the mounting screws, remove the rear door belt outside weartherstrip (A) by pulling it upward.

    Component Location 1. Rear door latch

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Indicator Components and Components Location

    C

    Categories

     
    Copyright © 2025 www.hgenesisdh.com - 0.0169