| Component |

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid trim after opening the trunk. (Refer to Body - "Trunk Lid Trim") 3.
Inspection 1. Remove the trunk inner switch. 2. Check for continuity between terminals of the trunk inner switch. Removal 1. Disconnect the negative (-) battery terminal.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.