Hyundai Genesis (DH): Seat Electrical / Power Seat Motor Description and Operation

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / Seat Electrical / Power Seat Motor Description and Operation

Description
Power seat motor is driven by a motor in the following.
1.
Slide motor
2.
Front tilt motor
3.
Rear Height motor
4.
Reclining motor
5.
Cushion extension motor
   
The power seat motor(IMS specification) mounted in this vehicle uses the hole sensor to calculate the maximum operation distance, so it does not require limit switch.
But the driver/passenger seats with non-IMS specification have the limit switch in the backrest motor.

    Component Location 1. Slide the motor2. Front Height motor3. Rear height motor4. Backrest adjustment motor5. Cushion extension motor6. Air lumbar support switch7.

    Inspection Power Seat Motor 1. Disconnect the connectors for each motor. 2. When the battery power is supplied to the motor connector, check the motor for smooth operation.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Head Lamp Leveling Unit Troubleshooting

    Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts.     Take care not to separate the bracket from rear bumper when removing the BSD sensor.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.021