Hyundai Genesis (DH): Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Specification
A/F Ratio (?)
Output Voltage(V)
RICH
Min. 0.8
LEAN
Max. 0.1

Item
Specification
Heater Resistance (?)
3.0 ~ 4.1 [20

    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed on upstream and downstream of the Manifold Catalyst Converter (MCC).

    Signal Waveform

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Front Fog Lamps Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove the front fog lamp assembly (A) after loosening the mounting nut.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts.     Take care not to separate the bracket from rear bumper when removing the BSD sensor.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0211