Hyundai Genesis (DH): AVN System / External AMP Components and Components Location

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / AVN System / External AMP Components and Components Location

Components

NO.
Connector A
NO.
Connector B
NO.
Connector C
1
B (+)
1
-
1
Right side low (+)
2
B (+)
2
-
2
Left side low (+)
3
B (+)
3
-
3
Right front midrange/tweeter (+)
4
-
4
-
4
Left front midrange/tweeter (+)
5
Multimedia-CAN (high)
5
-
5
Right front door (+)
6
Multimedia-CAN (low)
6
-
6
Left front door (+)
7
ACC
7
-
7
Right side low (-)
8
-
8
-
8
Left side low (-)
9
-
9
-
9
Right front midrange/tweeter (-)
10
-
10
-
10
Left front midrange/tweeter (-)
11
NAVI sound (+)
11
-
11
Right front door (-)
12
Sub woofer 2 (+)
12
-
12
Left front door (-)
13
Sub woofer 1 (+)
13
-
13

14
GND
14
-
14
15
GND
15
-
15
16
GND
16
-
16
17
-
17

17
18
SPDIF (+)
18
18
19
SPDIF (-)
19
19
20
SPDIF GND(shield)
20
20
21
-
21
21
22
-
22
22
23
-
23

24
NAVI sound (-)
24

25
Sub woofer 2 (-)
25

26
Sub woofer 1 (-)
26


    Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side garnish assembly.

    Removal 1. Disconnect the negative (-) battery terminal. 2. Open the trunk, remove the left trunk trim. (Refer to Body - "Trunk Trim") 3. Remove the external amplifier (C) after disconnecting the connector (A),(B) and loosening the mounting nuts.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor oil Repair procedures

    Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the compressor model.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0381