| Removal |
| 1. |
Remove the battery(-) terminals. |
| 2. |
Remove the AVN monitor.
(Body - "Premium AVN System" ) |
| 3. |
Disconnect the cables and connectors (A) from the MTS unit.
|
| 4. |
Remove the MTS unit after loosening the screws and nut.
|
| Installation |
| 1. |
Tighten the connector and cable to the blue link unit. |
| 2. |
Install the Blue Link Unit |
| 3. |
Install the glove box. |
| 4. |
Connect the battery(-) terminals. |
Schematic Diagrams
Inspection 1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check that the aim of the head lamp changes smoothly when the head lamp leveling device switch is turned on. 4. If it does not operate well, check the connector and terminals to make sure that they are connected.
Removal Blind Spot Detection Warning Indicator 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A). Installation Blind Spot Detection Warning Indicator 1. Install the outside mirror. 2. Connect the negative (-) battery terminal.