| Removal |
Components Connector Pin Information No.Connector AConnector B1-MM CAN HIGH2Rear seat LCD monitor ON / OFF-3-High-speed CAN (+)4--5-AUX video shield GND6-IGN 1 B(+)7i-BOX microphone (+)AUX Video8Illumination (+)AUX R 9Reverse-10i-BOX microphone shield GND MIC(+) 11-ACC 12-B(+)13-MM CAN low14Front seat LCD monitor ON / OFF-15-High-speed CAN (-)16i-BOX microphone (-)Vehicle speed17Illumination (-)Mic shield GND18Antenna B(+) AUX audio shield GND19?AUX video GND20AUX DETECT21AUX L 22 MIC(-)23M GND24M GND Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Repair proceduresRemoval 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal. Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair proceduresInspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse. Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0267
|