Hyundai Genesis (DH): Engine Control System / Fuel Pressure Control Valve Description and Operation

Hyundai Genesis (DH) 2013-2016 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve Description and Operation

Description
Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls the fuel amount flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2.

    Specification ItemSpecificationCoil Resistance (?)1.04 ~ 1.27 [23

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Description and Operation

    Description System Overview The System offers the following features: - Changing the state of engine ignition and power by using the start button. - Controlling external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical ignition switch.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Refrigerant Line Repair procedures

    Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace any faulty tubes or hoses.     Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten the bolt or nut joint to the specified torque.

    Categories

     
    Copyright В© 2025 www.hgenesisdh.com - 0.0238