Other information:
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with the L wrench (A).
Tightening torque :
9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
3.
Remove the receiver-drier (A) from condenser using a long
nose plier. Check for crumbled ...
Troubleshooting
SymptomsRemedyIf the cooling fan is not functioning under normal operating conditions • Check the connector • Check the voltage of the battery (#1). Check the fuse if the voltage is not applied. • Check the wires in the motor for short cir ...