Hyundai Genesis: Crash Pad / Cowl Cross Bar Assembly Components and Components Location

Component Location

1. Cowl cross bar assembly

Main Crash Pad Assembly Repair procedures

Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Cowl Cross Bar Assembly Repair procedures

Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Other information:

Hyundai Genesis (DH) 2013-2016 Owners Manual: If the engine overheats

If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1.Pull off the road and stop as soon as it is safe to do so. 2.Place the shift lever in P (Park) and set the pa ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Filler-Neck Assembly Repair procedures

Removal 1. Remove the filler neck mounting screws (A) after opening the fuel filler door. 2. Remove the rear-left wheel & tire and wheel house cover. 3. Disconnect the fuel filler hose (A) and leveling hose (B). 4. Disconnect the vent hose quick-connector (C). 5. Remove the ...