Hyundai Genesis (DH): Autonomous Emergency Braking(AEB) System / Components and Components Location
| Components |
Description AEB(Autonomous Emergency Braking) is a function purposed to avoid the collision or to reduce the damage against the accident which can be taken place from the late braking or insufficient braking power due to the reason of absented mind of the driver.
Driver settings AEB function ON/OFF switch is included in USM (User Setting Menu) and the state when being released from factory is ON. With the IGN ON, the ON condition is maintained by default and the drivers
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Repair procedures
- Starter Repair procedures
- 4 Wheel Drive (AWD) System
- New on site
- Most important about car
