Hyundai Genesis (DH): Autonomous Emergency Braking(AEB) System / Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Brake System / Autonomous Emergency Braking(AEB) System / Repair procedures

Driver settings
AEB function ON/OFF switch is included in USM (User Setting Menu) and the state when being released from factory is ON.
With the IGN ON, the ON condition is maintained by default and the drivers

    Components components and components location AEB system consists of the following systems Device to detect a potential obstacle forward (radar, cameras) Human-Machine Interface (HMI) to warn the driver and change settings Braking device for generating a braking force

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Repair procedures

    Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0342