Hyundai Genesis (DH): Blind Spot Detection system / Specifications

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / Blind Spot Detection system / Specifications

Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
15?/h ~ 250?/h
Sensible distance
70m (Sedan)
Curvature radius
Start : More than 100m
Stop : Less than 70m
Frequency
24 GHz
Numbers
2EA (Master 1EA, Slave 1EA)

    Components 1. Blind Spot Detection (BSD) Unit2. BSD switch 3. Speaker4. BSD warning lamp5. Head up display (HUD)

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Description and Operation

    Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0222