Hyundai Genesis: AUTO HOLD / To release
- Press the accelerator pedal with
the shift lever in R (Reverse), D
(Drive) or Sports Mode, the Auto
Hold will be released automatically
and the vehicle will start to move.
The indicator changes from green
to white.
- If the vehicle is restarted using the
advanced smart cruise control
lever (RES+ or SET-) while Auto
Hold and advanced smart cruise
control is operating (The green
AUTO HOLD indicator), the Auto
Hold will be released regardless of
accelerator pedal operation.
1. Press the [AUTO HOLD] switch.
The AUTO HOLD indicator will illuminate
white and the system will
be in the standby position.
2. When you stop the vehicle completely
by depressing the br ...
1. Depress the brake pedal.
2. Press the [AUTO HOLD] switch.
The AUTO HOLD indicator will
turn off.
WARNING
To prevent, unexpected and
sudden vehicle movement,
ALWAYS press your foot on t ...
Other information:
Inspection
Steering Wheel Remote Control system (SWRC) can be diagnosed
by GDS because it receives and sends signals through CAN communication.
1.
Check for resistance between terminals in each switch position(LH).
[Audio]
SwitchConnectorterminalResistance(±5%)Speec ...
Adjustment
TCM Learning
When shift shock occurs or parts related with the transmission are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
•
Transmission assembly replacement
•
TCM replacement
•
TCM upgrading
1.
TCM ...