Hyundai Genesis: Interior Trim / Rear Wheel House Trim Components and Components Location

Component Location

1. Rear wheel house trim

Rear Pillar Trim Repair procedures

Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Rear Wheel House Trim Repair procedures

Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures

Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, and put a finger on the open end of the PCV valve to make sure that the intake manifold vacuum turns to vacuum state. ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Differential Carrier Repair procedures

Removal 1. Remove the rear wheel and tire (A) from the rear hub. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     Be careful not to damage the hub bolts when removing the rear wheel and tire (A). 2. With the brake engaged, remove the s ...