Hyundai Genesis: Engine Control System / Oil Pressure Sensor (OPS) Specifications

Specifications
Terminal
Resistance (k?)
2 - 4
2.76 ~ 4.13
2 - 3
1.89 ~ 2.84
3 - 4
1.71 ~ 2.84

Oil Pressure Sensor (OPS) Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

Oil Pressure Sensor (OPS) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Steering Column and Shaft Repair procedures


Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels are placed in the straight ahead position. 3. Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Accelerator Position Sensor (APS) Repair procedures


Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer to “Specification” Removal 1. Turn the ignition switch OFF and disconnect the negative ( ...

© 2013-2024 www.hgenesisdh.com