| Inspection |
| 1. |
Disconnect the negative (-)battery terminal. |
| 2. |
Remove the overhead console. |
| 3. |
Remove the hands-free mic(B) after loosening the screws and connector (A).
|
| 4. |
Check for the continuity between the mic terminals.
|
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3.
Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.