Other information:
Removal
1.
Remove the LH/RH cylinder head assembly.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket separator 1# (A) and 2# (B).
Installation
1.
Install the water jacket separator 1# (A) and 2# (B).
Insert the separator align with b ...
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).
4.
Using an ohmmeter, check that there is continuity between each terminal.
TerminalContinuity30 - 87NO85 - 86YES
5.
Apply 12V ...