| Replacement |
Component Location 1. Crash pad side garnish assembly Component Location 1. Crash pad lower panel Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair proceduresReplacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier. Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Description and OperationDescription The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0183
|