| Troubleshooting |
| Symptoms | Remedy |
| If the cooling fan is not functioning under normal operating conditions | |
Removal And Installation Cooling fan 1. Disconnect the battery "-" terminal from the trunk room. 2. Remove the air cleaner assembly. (Refer to Intake and Exhaust System - "Air Cleaner") 3.
Components 1. Radiator assembly2. Radiator upper mounting bracket3. Radiator lower mounting insulator4. Radiator cap5. Radiator lower hose6. Radiator upper hose7.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal.
Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor