| Description |



Description The amount of exhaust emissions (CO, HC, NOx) is controlled by a combination of engine modifications and special control components. The basic system control is composed of the combustion chamber, intake manifold, camshaft and ignition system.
Removal (Refer to Engine Mechanical System - "Exhaust Manifold") Installation (Refer to Engine Mechanical System - "Exhaust Manifold")
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and fall with lower intensive light.