Hyundai Genesis (DH): Charging System / Battery Specifications
| Specifications |
| Item | Specification |
| Model type | AGM105L-DIN |
| Cold Cranking Amperage (A) | 950 (SAE) / 760 (EN) |
| Reserve Capacity (Min) | 190 |
Description [AGM Battery] AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fleece.
Removal 1. Disconnect the battery sensor connector (A), battery negative terminal (B) and positive terminal (C). 2. Disconnect the vent hose connector (A) from the battery air vent hole.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If they are clogged, clean them with water, and blow them with compressed air. If they are bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Rain Sensor Repair procedures
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Active Air Flap(AAF) Repair procedures
- New on site
- Most important about car
