| Specification |
| Item | Specification |
| Rated voltage | 13.5V , 150A |
| Speed in use | 1,500 ~ 18,000rpm |
| Voltage regulator | IC Regulator built in type |
| Regulator reform mode voltage (V) [COM terminal] | 14.0 ~ 15.5 (-35 |
Description The Alternator has built-in diodes, each rectifying AC current to DC current, to supply DC current to the alternator
Circuit Diagram
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t
Self Diagnosis 1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel blinks three times every 0.5 second, the corresponding fault code blinks on the setup temperature display panel every 0.5 second and will show two figures.