Hyundai Genesis (DH): Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and Operation
Hyundai Genesis (DH) 2013-2016 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and Operation
| Description |
The Driver Airbag (DAB) is installed in the steering wheel
and electrically connected to SRSCM via the clock spring. It protects
the driver by deploying the airbag when frontal crash occurs. The SRSCM
determines deployment of the Driver Airbag (DAB).
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the
circuit resistance is measured with a tester, accidental airbag
deployment will result in serious personal injury. |
Components 1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures
Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Hyundai Genesis (DH) 2013-2016 Service Manual: A/C Pressure Transducer Description and Operation
Description The A/C Pressure Transducer (APT) converts the pressure value of high-pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it at high speed or low speed.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Brake System
- Smart Cruise Control Unit Repair procedures
- General Information
- New on site
- Most important about car
Copyright В© 2026 www.hgenesisdh.com - 0.0234