Hyundai Genesis: Hydraulic System / Valve Body Description and Operation

Description
The valve body is essential to automatic transmission control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The valve body also features electronic solenoid valves that ensure smooth gear changes.

Oil Filter Repair procedures
Replacement 1. Completely drain ATF. 2. Remove the valve body cover (A). 3. Oil filter is integral with the valve body cover, so replace the valve body cover.     The o ...

Valve Body Components and Components Location
Components Location 1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E-Module5. Line pressure control solenoid valve6. Damper clutch control solenoid valve7. ON/OFF solenoid va ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Fuel Pump Control Module (FPCM) Description and Operation


Description The fuel pump control module (FPCM) is installed on the right side of the trunk compartment. It controls the BLDC (Brushless DC) motor mounted inside the variable low pressure fuel pump. This module compares the target fuel pressure data received from the ECM to the current fu ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Oil Pressure Sensor (OPS) Description and Operation


Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which m ...

© 2013-2021 www.hgenesisdh.com