Hyundai Genesis: General Information / Description and Operation

Description
Emissions control system consists of the three major systems.
Crankcase Emission Control System prevents blow-by gas from going into the atmosphere. This system burns this gas after moving it to the intake manifold (Closed Crankcase Ventilation Type).
Evaporative Emission Control System prevents evaporative gas from going into the atmosphere. This system burns the gas at appropriate engine operating condition after gathering it in the canister.
Exhaust Emission Control System converts the three pollutants-hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) - into harmless substances by using the 3-way catalytic converter.
General Information
...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ? Specification ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ? Type: Piezo-Resistive ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Shift Cable Repair procedures


Removal 1. Remove the nut (B) and clip (C). 2. Remove the shift cable (A) assembly from the transmission. Tightening torque : 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft) 3. Remove the floor console. (Refer to Body-"Floor Console") 4. Disconnect the shift cable (A) fr ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Variable Intake Solenoid (VIS) Valve Description and Operation


Description Variable Intake manifold Solenoid (VIS) valves are installed on the intake manifold (VIS Valve 1) and the surge tank (VIS Valve 2). These VIS valve 1 and 2 control vacuum modulators which activate valves in the intake manifold and the surge tank. These valves opens or closes b ...

© 2013-2025 www.hgenesisdh.com