| Troubleshooting |
| Symptoms | Remedy |
| If the cooling fan is not functioning under normal operating conditions | |
Removal And Installation Cooling fan 1. Disconnect the battery "-" terminal from the trunk room. 2. Remove the air cleaner assembly. (Refer to Intake and Exhaust System - "Air Cleaner") 3.
Components 1. Radiator assembly2. Radiator upper mounting bracket3. Radiator lower mounting insulator4. Radiator cap5. Radiator lower hose6. Radiator upper hose7.
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,