Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
5.
Check that the resistance is within t ...
Description
The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the ...