Hyundai Genesis: Tires and wheels / Wheel replacement & Tire traction
Wheel replacement
When replacing the metal wheels for
any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces. Tires should be
replaced when tread wear indicators
appear. To reduce the possibility of
losing control, slow down whenever
there is rain, snow or ice on the road.
If the tire is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is
less than 1/16 inch (1.6 mm) of tread
left on the tire. Replace the tire ...
In addition to proper inflation, correct
wheel alignment helps to decrease
tire wear. If you find a tire is worn
unevenly, have your dealer check the
wheel alignment.
When you have new tires ...
Other information:
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the rear-left wheel & tire and house cover.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the vent hose quick-connector (B).
5.
Disconnect the vapor hose qu ...
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the installation bolt (A), and then remove the sensor from the cylinder block.
[Knock Sensor #2 (Bank 2)]
1 ...