Hyundai Genesis: Warning Messages / Shift to "P" or "N" to start engine

• This warning message illuminates if you try to start the engine with the shift lever not in the P (Park) or N (Neutral) position.

✽ NOTICE

You can start the engine with the shift lever in the N (Neutral) position. But, for your safety, we recommend that you start the engine with the shift lever in the P (Park) position.

Warning Messages

...

Shift to "P" position

This message illuminates if you try to turn off the engine without the shift lever in P (Park) position. At this time, the Engine Start/Stop button turns to the ACC position (If you ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Compression Test

Inspection Compression Pressure     In case of lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up engine until the normal operating temperature (80~95°C(176-203°F)). 2. Remove the surge tank. (Refer to I ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Barometric Pressure Sensor (BPS) Description and Operation

Description Barometric Pressure Sensor (BPS) is a speed-density type sensor and is installed on the air cleaner assembly. It senses absolute pressure of the air cleaner assembly and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calculat ...