Hyundai Genesis: Warning Messages / Shift to "P" position

  • This message illuminates if you try to turn off the engine without the shift lever in P (Park) position.
  • At this time, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position).
Shift to "P" or "N" to start engine
• This warning message illuminates if you try to start the engine with the shift lever not in the P (Park) or N (Neutral) position. ✽ NOTICE You can start the engine with the shift lev ...

Press START button again
This message illuminates if you can not operate the Engine Start/Stop button when there is a problem with the Engine Start/Stop button system. It means that you could start the e ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Disc Brake Repair procedures


Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the guide rod bolt (B) and pivot the caliper up out of the way.     Do not loosen the bridge bolt (A) instead of the guide bolt (B). ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Passenger Airbag (PAB) Module Description and Operation


Description Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending of crash speed or the tightening of seat belt, it is decided a timing about both 2 firing squibs of airbag and 1 firing ...

© 2013-2025 www.hgenesisdh.com