Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat.
(Refer to Body - "Front Seat Assembly")
3.
Driver settings menu (USM) is Off,
4.
Loosen the mounting screws (2) and remove the IMS unit (A).
Installation
1.
Install the memory power seat unit.
...
Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
The following is the summarized A/S procedure.
NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC C ...