Hyundai Genesis: Maintenance / Parking brake
Checking the parking brake
Foot type
.jpg)
Check whether the stroke is within
specification when the parking brake
pedal is depressed with 44 lb (20 kg,
196 N) of force. Also, the parking
brake alone should securely hold the
vehicle on a fairly steep grade. If the
stroke is more or less than specified,
have the parking brake adjusted by
an authorized HYUNDAI dealer.
Stroke : 3 notch
Checking the washer fluid
level
Check the fluid level in the washer
fluid reservoir and add fluid if necessary.
Plain water may be used if
washer fluid is not available.
However, use wash ...
Filter replacement
The air cleaner filter can be cleaned
for inspection using compressed air.
Do not attempt to wash or to rinse it,
as water will damage the filter. If
soiled, the air clea ...
Other information:
Troubleshooting
SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Oil short or oil plethora bearing wearLoose or damaged engine drive plate.Replace the crankshaft and bearings as required.Repair or replace the drive plate as required.Worn piston rings.(Oil consu ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition swit ...