Hyundai Genesis (DH): Brake System / Stop Lamp Switch Description and Operation
| Description |
| The stop lamp switch plays the role of supplying signals to
turn on stop lamps and convenience devices (HECU, ECU, BCM, SML, etc.).
The stop lamp switch is a system for drivers to express their intention
to the brake by press the brake pedal. |
Components Location 1. Brake pedal member assembly2. Stop lamp switch3. Clevis pin4. Snap pin5. Brake pedal stopper6. Return spring7. Bolt
Schematic Diagram System Circuit Diagram Terminal function Description1IGN12Engine Control Module (ECM)3B+4Stop Lmap
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.
Hyundai Genesis (DH) 2013-2016 Service Manual: CO2 Sensor Description and Operation
Description This system maintains the density of carbon dioxide constantly in vehicle interior by measuring the amount of carbon dioxide to increase the comfortableness and the fuel consumption rate when air conditioning system is operating.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Front Door
- Rain Sensor Repair procedures
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
