| Description |
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using a specified tester. If the
circuit resistance is measured with a tester, the pretensioner will be
ignited accidentally. This will result in serious personal injury. |
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Description The A/C Pressure Transducer (APT) converts the pressure value of high-pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it at high speed or low speed.