Hyundai Genesis (DH): Body Electrical System / Power Door Locks
- Components and Components Location
- Description and Operation
- Power Door Lock Actuators Components and Components Location
- Power Door Lock Actuators Repair procedures
- Power Door Lock Switch Repair procedures
Troubleshooting Error ItemFailure symptomInspection items Detailed inspections Relevant Parts/ComponentsScreen displayTFT-LCD screen does not turn on 1.
Component Location 1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. IGPM (Integrated Gateway Power Control Module)4. Door lock knob5. Trunk lid actuator6.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.
Hyundai Genesis (DH) 2013-2016 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If they are clogged, clean them with water, and blow them with compressed air. If they are bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Active Air Flap(AAF) Repair procedures
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Starter Repair procedures
- New on site
- Most important about car
