Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the nuts (4EA) holding the rear combination
lamp and disconnecting the connector (A), remove the outside rear
combination lamp assembly.
3.
Remove the bulb (A) after turning it in the counter clock-wise direction.
Inspection
1.
Check the condenser fins for clogging and damage. If they are
clogged, clean them with water, and blow them with compressed air. If
they are bent, gently bend them using a screwdriver or pliers.
2.
Check the condenser connections for leakage, and repair or replace it, if required.