| Inspection |
| 1. |
Disconnect the negative (-)battery terminal. |
| 2. |
Remove the overhead console. |
| 3. |
Remove the hands-free mic(B) after loosening the screws and connector (A).
|
| 4. |
Check for the continuity between the mic terminals.
|
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror wiring cover (A) and rain sensor cover (B). 3. Remove the LKAS unit connector (A). 4. Remove the LKAS unit after disengaging the mounting bracket (A). Installation 1.
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,