Hyundai Genesis (DH): Cooling System / Cooling Fan Description and Operation

Hyundai Genesis (DH) 2013-2016 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Description and Operation

Description
The cooling fan controlsx the cooling fan motor voltage depending on the duty output from the ECU (Freq.: 300Hz).
[Signal from the ECU to the PWM (SI: 300Hz)]

SI Duty
Motor Voltage (V)
Variation (V)
10%
0

    Components 1. Cooling fan shroud2. Cooing fan3. Cooling fan motor4. Cooling far rear cover5. Cooling fan controller (PWM)6. Reservoir tank

    Specifications [Cooling fan control (PWM)] ItemsPerformance specMAX, load current consumption (12V)23.3 + 10% AInputCommunication frequency300

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts.     Take care not to separate the bracket from rear bumper when removing the BSD sensor.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Power Mosfet Repair procedures

    Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and control the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed. Specification Fan Speed (Manual)Motor Voltage (V)13.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0313