| Inspection |
In case of lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. |
| 1. |
Warm up engine until the normal operating temperature (80~95 |
Specifications DescriptionSpecificationsLimitGeneralTypeV-type, DOHC?Number of cylinders6?Bore96mm (3.7795 in.)?Stroke87mm (3.4252 in.)?Total displacement 3,778cc (230.
Troubleshooting SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Oil short or oil plethora bearing wearLoose or damaged engine drive plate.
Inspection 1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check that the aim of the head lamp changes smoothly when the head lamp leveling device switch is turned on. 4. If it does not operate well, check the connector and terminals to make sure that they are connected.
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.